Showing 1–12 of 25 results
-
$1,097.00 - Stand alone control unit. No pump included.
- Remote Monitoring Capabilities.
- Controls the recirculation pump and modulates storage tank temperature based on demand.
- Eliminates the wait for hot water at your office or building, saving thousands of gallons of needlessly wasted water per year.
-
$1,806.00 - Ideally suited for buildings with central hot water systems, including: Apartments, Condos, Hotels, Dorms, etc.
- Remote Monitoring Capabilities.
- Controls the recirculation pump and modulates storage tank temperature based on demand.
- Eliminates the wait for hot water at your office or building, saving thousands of gallons of needlessly wasted water per year.
-
$1,355.00 - For Use on Standard Plumbing with a dedicated Return Line and light commercial buildings.
- Remote Monitoring Capabilities.
- Controls the recirculation pump and modulates storage tank temperature based on demand.
- Eliminates the wait for hot water at your office or building, saving thousands of gallons of needlessly wasted water per year.
-
$1,548.00 - For Use on Standard Plumbing with a dedicated Return Line and light commercial buildings.
- Remote Monitoring Capabilities.
- Controls the recirculation pump and modulates storage tank temperature based on demand.
- Eliminates the wait for hot water at your office or building, saving thousands of gallons of needlessly wasted water per year.
-
$24.00 - Lightweight design, exquisite appearance, simple to install, highly accurate for reading temperatures of the return supply, recirculation line, cold water supply and/or mixing valves.
- The copper temperature sensor has a wide measuring range. Waterproof, moisture-proof and anti-rust.
- The resistance in the wire will change as the temperature does, and by supplying a constant current, the measured voltage will drop across this resistance which can be used to determine the temperature.
- For the AutoHotEMS additional temperature sensors can be purchased.
-
$100.00 - The CT binary current switches provide a cost-effective solution for monitoring the run time of any piece of equipment, such as: Pumps, boilers, fans, or heat pumps. Connects easily to the AutoHot EMS controller in one of (4) available CT inputs
- Measures alternating current (AC) in a conductor without the need to disconnect the conductor or interrupt the electrical circuit.
- Low setpoint – minimum trip point as low as 0.15 A, avoids the need for multiple wraps of the conductor through the sensor even on loads as small as 1/5 hp.
- Removable mounting bracket provides installation flexibility.
- Quick installation – split-core for fast retrofit installation.
- Induced from monitored current sensor power.
- The CT logger connects to our line of commercial controllers.
-
$280.00 - For Use With Commercial Controllers for Remote Monitoring.
- Can be used for connecting the AutoHot EMS to Remote Monitoring if a Wi-Fi Network is not available.
- Can be used for indoor and outdoor use.
- Easy-to-install wireless connectivity in remote locations.
- Internet connection sharing for multiple devices (as long as they are in range) can access the WiFi network at the same time.
- The download speed is up to 150 mbps, upload speed is up to 50 mbps, and wireless transmission speed is 300 mbps.
- Reduces co-channel interference, expands the wireless transmission range, and eliminates dead zones.
- The waterproof and dust proof casing ensures it can withstand harsh outdoor climates and indoor industrial environments.
-
$17.17 - The wireless push button activator will activate the AutoHot on-demand system from anywhere in the house to turn on.
- Can be used with up to nine other wireless buttons or motion sensors for a total of ten.
- Includes two AAA batteries and can be powered with a USB for an alternative charge.
-
$49.92 - The wireless motion sensor will activate the AutoHot on-demand system by the detection of motion in any room of the house.
- Once paired with the wireless receiver, the wireless motion sensor has a range of up to 600 feet in open air.
- A maximum of 10 wireless, or hardwired devices can be used per controller.
- Includes two AAA batteries and can be powered with a USB for an alternative charge.
-
$44.30 - Hardwired LED lighted rocker switch indicator.
- Light turns on when hot water is ready.
- The light turns off when lines are cool, and the pump needs to be activated.
- LED Rocker Switches need to be wired in parallel.
-
$25.84 - Hardwired LED lighted push button activator.
- Light turns on when hot water is ready to use.
- The LED light turns off when lines are cool, and the pump needs to be activated.
- The LED lighted indicator push button needs to be wired in parallel.
- Stainless steel color.
-
$12.07 - The decorative hardwired rocker switch can be used with any AutoHot on-demand pump system for activation.
- Multiple switches can be used, running parallel, to activate the system from different fixtures.
- Comes with 4 feet of connection wire.
- Egg shell white color.